引信静态试验模拟动态试验研究

研究了用静态试验评价无线电引信质量性能的方法。分析了静态试验项目、样本量的确定,建立了各组件失效与引信失效的对应关系,提出了通过组件的失效信息计算引信失效率的方法。     

舰用锅炉过热器使用寿命的论证

鉴于某型舰用锅炉过热器破损的主因在于其内部腐蚀,而破损的主要方式是由管头的溃烂开始直至整个管头烂掉为止,导致管子的胀接松动而漏泄。因此,过热器的使用年限全取决于管头的腐蚀速度。通过确定过热器内管头的腐蚀率、锅炉年内运行时间以及保养时间等要素来估算过热器的使用寿命。     

The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999     

线性可调音速喷嘴工作特性仿真

为了满足组合发动机模态转换的要求,连续稳定调节推进剂流量十分关键。为此,针对气体推进剂,在常规音速喷嘴的基础上设计了一种可调音速喷嘴。通过塞锥改变音速喷嘴的节流面积,进而实现流量的连续调节。采用两次包络线方法设计塞锥型面,使得可调音速喷嘴具有线性的流量特性。采用计算流体动力学数值仿真研究可调音速喷嘴的工作特性。仿真结果表明反压小于临界反压时,可调音速喷嘴流量不受反压影响。可调音速喷嘴保持临界状态的临界反压比随流量的减小呈增大的趋势。线性可调音速喷嘴的流量与塞锥位置有较好的线性关系,其流量系数高且几乎不受塞锥位置的影响。     

JTIDS数据链在部分频带干扰下的性能分析

联合战术信息分发系统(Joint Tactical Information Distribution System,简称JTIDS)采用组合调制体制和多层编码体系保证报文传输的可靠性。分析了JTIDS数据链在莱斯衰落信道环境下的抗干扰性能,并通过仿真分析了该系统在部分频带干扰下的符号误码率和报文丢失率。仿真结果显示,由于JTIDS系统将RS编码、交织等多种编码技术和DS/FFH MSK调制技术相结合,使其在复杂信道环境下保持较低的符号误码率及报文丢失率,满足数据链报文传输可靠性的要求。     

光纤陀螺惯性导航算法及其仿真

针对角速率和比力输入时的惯性导航算法进行了深入的研究。对高动态环境下的不同的姿态更新算法进行了对比研究,提出了一种新的速度和位置更新中的转动补偿算法,它将低动态和高动态(划船效应和涡卷效应)转动效应合二为一进行修正。并对系统算法进行了计算机仿真研究,最后给出了仿真结果。     

悬浮式深弹的被动测距技术

通过测量线谱信号相位变化率来测量目标距离变化率,说明其原理并推导出相应的结果,根据对有关试验结果的分析表明,该方法简单易行,适合于浅水海域中悬浮式深弹测距使用,从而为深水炸弹反鱼雷提供了相关技术支持.     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

一种基于Lorentzian函数的变步长LMS自适应滤波算法

为了改善传统的LMS类算法存在的缺点,提高算法的收敛速度和跟踪性能,提出了一种基于Lorentzian函数的变步长LMS自适应滤波算法.该算法采用Lorentzian函数来建立估计误差e(n)和步长因子μ(n)之间的非线性关系,以达到提高收敛速度和改善跟踪性能的目的.计算机仿真表明,算法与其他LMS类自适应滤波算法相比,在收敛速度和跟踪性能上都有较大的提升.     

消防与保险互动机制研究

从分析消防和保险合作发展的历史、合作过程中存在的问题入手,探讨了新形势下消防与保险合作的机制,并从五个方面提出了消防和保险具体合作的方法和步骤,为今后消防和保险的合作提供了建设性的意见,也为消防工作今后的发展提供了新的思路。